Select Country
Implementing Quality Management System since 2001
Loading ...KKE 503 : Automatic High Pressure Truck Wash Equipment
Equipment Overview
In todays competetive markets, you shouldn't miss the opportunity of using your vehicles for your advertisements.
Clean trucks and vehicles increase your brand popularity and thereby increasing your goodwill in the market. Manual truck wash consumes more time, water and money.
With KKE 503 you can achieve superior washing results with much lesser time and thereby less money than the hand wash.
The Truck Wash Equipment KKE 503 is fully automatic and operated by one operator. KKE 503 moves on ground mounted rails. The vehicle is driven in position and remains stationary and gantry moves over the vehicle and executes all operations. The equipment use latest, proven high pressure technology which has no limitation about the shape of the vehicle, Tractor - trailers, Container trucks, Tankers, Garbage Trucks, Cement Trucks, Fire Engines, Double Decker Buses, Single decker Buses, Pick up vans, Station Wagons, Cars, any vehicle fitting into washable dimensions .
The basic cycle contains three step washing sequence. The first pass is high pressure Pre-wash which has wetting chemicals to wet dirt on the vehicle surface. The second pass is soap application process by specially developed nozzles by KKE. The third pass is high pressure rinse, which removes all the dirt, off the truck surface. The horizontal water nozzle bank follows the contour of the vehicle. A High pressure Plunger pump assists the main washing arch for cleaning tyre and rocker panels.
kKE 503 is the result of a lot of reseach and development in the vehicle washing industry and with the feedback from fleet owners.
Features
KKE 503 Car Wash Equipment : Standard Equipment Features
Parts of Equipment :
Trolley
 |
The structure is manufactured with heavy tubular steel sections with modular design which is painted with water proof paint. The gantry travels on two rails on the wash bay, which is driven by two geared motors. The control of the Gantry is Automatic via the Programmable Logic Controller (PLC) or Manual using the Operator’s Panel. The Gantry carries various systems and it optically senses the vehicle and its dimensions and provides feedback to the PLC and operator’s Panel. |
Pre Wash Arch
| This is special spray arch, equipped with low discharge nozzles. The Pre Wash Arch sprays water initially over the vehicle to soak the hard mud stains, salt deposits, bird droppings, etc. |
Chemical Spray System / Soap System
| Soap system sprays soap and chemical formulation on to the car surface. Soap spraying assists the high pressure washing and enhances the cleaning value. |
High Pressure Washing Arch
KKE 503 Truck Wash Model uses high pressure jets. These jets strike the truck surface at high pressure and remove the dirt. The jets reach to the corners and crevices and clean effectively, whatever may be the shape. This system is suitable for any truck, from Tankers to Trailer Trucks. The High Pressure Washing Arch is mounted on the gantry. The nozzles and pipelines are all made of Stainless Steel. |
Contour Following Nozzles
 |
The horizontal bank of nozzles, follows the contour of the car. The horizontal bank always maintains safe distance from the car surface. The water jets adjust their angle to face the car surface.All the pipes on the equipment are made of Stainless Steel grade 304. |
Wheel Guides
| Wheel guides help to position the cars to be washed at correct place at the wash bay, hence ensuring safety of the equipment as well as the car. |
High Pressure Nozzles
| The lower part of water spray arch consists of 4 high discharge nozzles on both sides which increases the level of cleaning in those unclean areas. |
High Pressure Under Chassis Wash System
 |
Under Chasis wash takes place at the entry of the wash bay. The under chassis wash uses the same water pump, that for the main high pressure arch. It consists of network of special high impact nozzles, which remove dirt effectively from the bottom surface. The Under Chassis Wash System is controlled from the Operator’s Panel. It can set to two modes, they are :- Automatic and Manual. When the system is switched to Automatic Mode, the Under Chassis Wash system gets activated automatically as the vehicle enters and is deactivated as soon as the complete truck passes over it. The nozzles, fittings and pipes, all are made up of Stainless steel, which ensure prolonged service life. All the rotating parts use Solid State Teflon bearings, which can run in harshest environments and do not require any lubrication throughout their life. |
Operators Panel
 |
Operators Panel is easy to use and understand, user interface panel. You can select desired wash program through selector switch on operator panel. You get information about working cycle, while the equipment is washing the car by using different programs, selected by the operator. The operator’s panel is easy to use and understand for any person. |
Computerized Control System and Intelli Wash Programs
| KKE 300 series is computer controlled and gives you the versatility to accommodate smallest to the longest cars. It enables you to select wash program according to the level of dirtiness of the car, hence optimizing on everything; from electricity to time. The components used while manufacturing of control system, undergo a rugged quality control to ensure continuous and reliable service at your end. The control panel is made up of Stainless Steel / Powder Coated, to ensure long service life. The control offers travel speeds from 4m/min to 10 m/min |
Optionals
Additional Length
The washable length of KKE 503 can be increased depending on your vehicle fleet. As the length of the equipment increases, the length of wheel guides, rails, pipes, power and control wires increases.
The maximum washing length of the equipment can go upto 23 m. The length of the bay would depend upon the washable length of the equipment.
Ordering Code : KKE100998
Standalone Drying System
An arch is installed at some distance from the wash bay. As the truck moves through it, the blowers start automatically and remain ON for 60 secs (depends on local conditions) or till the truck is moving through it. There are eight blowers , two on the top and three on each side.
Ordering Code : DS02 - 503
Additional Spares kit for 3 years
This spares kit consists of most of the items which get worn off and may be needed to be replaced for providing uninterrupted service to your customers. It is always good to have spares rather than ordering them when they are actually required. With the spares kit, you’ll will able to avoid the downtime as you may replace the parts immediately.
Ordering Code : SK01 - 503
Technicals
Washbay Dimensions
| Preferred | Minimum | |
| Length | 17 m |
|
| Width | 6 m |
|
| Height | 6 m |
Washable Dimensions
| Length | 13 m can be increased upto 23 m |
| Width | 2.75 m |
| Height | 4.0 m |
Electrical Power
Option : 3 Phase 440 V A.C. 50 Hz.
Option : 3 Phase 380 V A.C. 50 Hz.
Option : 3 Phase 208 V A.C. 60 Hz.
Gallery
Visitor Comments
No comment added.
To add a comment fill the form below.
Thu, 28 Aug 2008 1:45:08,
Home Contact Us Dealership Login Sitemap
Car Wash Equipment Bus Wash Equipment Truck Wash Equipment
© K.K. Electronics , KKE Wash Systems 2000 - 2008
