Silicone wax is sprayed on the car surface. The silicone wax is sprayed all over the car, using special atomizing nozzles, after the washing cycle. Silicone wax formulation gives instant shine and protection to the car, in addition, it softens the hard rubber wipers and beading of the car . It is also water repellent and hence avoids staining of glasses due to droplet formation. Silicone wax is the best available wax till date and is available worldwide easily.

Triple foam wax, commonly known as Tri foam wax, which contains three colored wax which is sprayed on the vehicle. The foam created on the vehicle surface gives a sense of satisfaction to the customer, for which he is paying for. The triple foam wax is sprayed by special foam generating nozzles. The foam created on the vehicle surface is washed off by a high pressure pass.

Drying System consists of 4 high volume blowers, which follow the contour of the vehicle. The contour of the vehicle is optically sensed and the blower follows the contour of the vehicle. There are four blowers, two drying the sides and two for drying the top. The top blowers always maintain a safe distance from the car. The blowers are mounted on the moving gantry itself and you don’t need to build another station for drying operation.

An arch is installed at some distance from the wash bay. As the car moves through it, the blowers start automatically and remain ON for 60 secs (depends on local conditions) or till the car is moving through it. There are four blowers , two on the top and one on each side.

The Swiveling Under Chassis Wash System uses electro - pneumatic swiveling mechanism which continuously moves the nozzles. The swiveling results in, increase in the covered area and thus cleaning those hard to reach places. The under chassis wash system covers the complete length of the car. The Under Chassis wash takes place while the soap is sprayed on the vehicle and uses the same high pump, that is used by high pressure rinsing.

This Under Chassis Wash System is located at the entry point of the car wash bay. The under chassis wash system automatically senses the car and switches on the Water pump. This Automatic activation feature can switched off from the Operator’s Panel.

Back lit display , displays the wash cycle which is in progress. The display is controlled by the PLC computer in the Central Control Panel. The display can be mounted any where near the equipment, so that the person washing his car can see the cycle which is in progress. The display is multi colored with logos and text representing the wash cycle. It also gives Red and Green signal, telling the customer, when to the enter the bay

In KKE 300 car wash system, there are many moving parts. This spares kit consists of most of the items which get worn off and may be needed to be replaced for providing uninterrupted service to your customers. It is always good to have spares rather than ordering them when they are actually required. With the spares kit, you’ll will able to avoid the downtime as you can replace the parts immediately.