Overview

18m Conveyor to wash approximately 30 - 60 cars per hour. This is a suggestive configuration. You can configure KKE Gamma Conveyor Car Wash Equipment as per your specific requirements. You can add or remove systems to cater to your local requirements.

Any requirement of approximately 30 cars per hour or more during the peak hours should consider a conveyorised car wash option. The KKE Gamma series has a robust conveyor and is hot dip galvanised for long life.

A typical 18 m configuration consists of the following :

Gamma Conveyor 50 – 60 cars per hour ( 19 m )

• KKE101788 : Correlator
• KKE101786 : Gamma Driving Unit 18m Conveyor
• KKE101784 : Gamma Intermediate Units x 4
• KKE101785 : Gamma Driven Unit
• KKE101782 : Gamma Exit Side Collision Protection System
• KKE101809 : Gamma Dual (Water + Foam) Spray Arch
• KKE101769 : Gamma Skirt Brushes PE Bristles
• KKE101770 : Gamma Vertical Wrap Around Brushes PE Bristles x 2
• KKE101779 : Gamma Top Roof Brush PE Bristles
• KKE101814 : Gamma Rain Water Rinse Arch
• KKE101775 : Gamma Silicon Wax Spray Arch
• KKE101776 : Triple Foam Shine Wax Arch
• KKE101774 : Gamma 30 hp Blower Arch
• KKE101781 : Gamma Control System
• KKE102571 : Display Panel x 4
• KKE102380 : Tire Brush

 

The conveyor length is 18m and the corellator length is 1 m which makes the equipment length 19 m.

KKE102573 : Under Chassis Wash 10 hp can be added if felt necessary.

The conveyor equipment is easy to operate and easy maintain.

 

Technical Data

 

Washable Dimensions
Width	2000 mm
Height	2000 mm

Bay Dimensions
Length	21,000 mm
Width	5,000 mm
Height	3,500 mm

Electricity
Voltage	415 V AC
Phase	3 Phase
Frequency	50 Hz
Generator	Can also run on Backup Generator System
Connected Load	Varies

Water Supply
Flow rate	200 lpm max

Air Supply
Pressure	7 bar
Connection	12 mm NB

 

 

Target Groups

 

---

United Kingdom

Equipment Photos

Equipment Videos

---