Car Wash Conveyor - 12m (40 ft)

Key Features

  • Hot Dip Galvanised Structure
  • Roller on Demand
  • Variable Frequency Drive Controlled
  • Pneumatic Chain Tensioning System
  • Anti Jamming Chain System
  • Powerful electric motor
  • UHMWPE Rollers and Guides

Overview

KKE 12 m / 40 feet conveyor is an over under conveyor with Variable Frequency Drive. The conveyor consists of a Driving unit, a Driven unit and 2 intermediate units.  The driving unit is located at the far end of the wash bay. The driven unit is located at the entrance. The Driven unit has the take up mechanism which pops out a roller when the car signal is present.

The Conveyor runs independently. The conveyor is activated using 24VDC / 24 VAC signal. The conveyor is designed to work with any Tunnel Controller. The conveyor speed can be set using 0 - 10 VDC signal.  The conveyor gives out Fault signal to the main wash controller.

Discuss your plans with us !

 

Technical Data

Interface  
I1 - Input Conveyor Start (24 VDC / 24 VAC)
I2 - Input Roller Out
I3 - Output 10 V DC Out
I4 - Input 0 - 10 VDC Speed Signal
I5 - Output Ground (10 VDC)
I6 - InputControl Voltage (From controller)
I7 - OutputConveyor Running
I8 - OutputRoller Out Confirm Signal
I9 - OutputFault Common
I10 - OutputFault NO
I11 - OutputFault NC
                       
Electricity  
Voltage 415 V AC / 208 V AC
Phase 3 Phase
Frequency 50 Hz / 60 Hz
Generator Can also run on Backup Generator System
Connected Load 3 hp / 2.2 kW
Air Supply  
Pressure 6 - 8 bar
Connection 12 mm NB

 

 

Target Groups


 

Europe

You need to be logged into access the above files. Click the button below to login.

Login
This site uses cookies. By continuing to use this site or clicking "I Agree", you agree to the use of cookies.